深圳市科必佳电子仪器有限公司

黄生：13424364967

电话：0755-88863468-810

传真：0755-83632951-801

Q Q：476668099

邮箱：mic.huang@163.com

MSN：michaelhuang79@hotmail.com

网址：www.kebijia.com

地址：深圳市福田区深南中路汇商中心3701-3706室（上海宾馆斜对面深圳远洋大厦）

本公司长期销售、出租、维修、计量：手机测试仪，综合测试仪，蓝牙测试仪，网络分析仪，频谱分析仪，信号源，屏蔽箱。

产品名称： 无线局域网测试仪 IQ2010
品　　牌： Litepoint
产品型号： IQ2010
产品指标： 0

IQ2010说明：

IQ2010测试系统采用多个硬件模块提供多任务测试功能，让GPS与FM两种无线标准群组可与Wi-Fi、WiMAX、蓝牙与近场通讯(NFC)标准群组进行平行测试。多个向量信号产生器(VSG)能针对FM、GPS、Wi-Fi、蓝牙、WiMAX、以及NFC等传输测试作业提供传输讯号。多个向量信号分析器(VSA)则提供比对功能，让系统进行接收测试。

IQ2010测试系统包含专门支持各种通讯标准(Wi-Fi802.11a/b/g/n、Bluetooth1.0/2.0/2.1、GPS、FMTX/RX、WiMAX802.16d/e与NFC)的软件函数库。用户可利用内置的图形化用户接口(GUI)或C++软件应用程序接口(API)，来选取各种信号产生与分析例程。IQ2010捕获到的数据会通过USB2.0传送到主控端计算机加以处理。C++API支持所有GUI功能，这使其可以轻松建立自动化测试程序，进行制造或设计特性分析的测试。

　　系统包含4个射频组件连接端口。其中两个分别支持GPS与FM，另外两个是公共端口(RF1与RF2)，用来连接被测试的Wi-Fi、WiMAX与蓝牙子系统。

　　IQ2010测试系统满足所有支持连接无线功能在射频校正、验证以及测试的需求。该系统仅须一次插入，并使用单一连结，就能测试多个无线功能。射频通讯端口的多样性提供线路弹性。使用者可同时测试单一通讯调变，或测试多重无线装置调变功能。IQ2010也可与手机测试系统配合使用，在一台测试机上支持完整的智能型手机测试程序。

　　利用多任务测试模式，IQ2010在依序测试Wi-Fi与蓝牙通讯功能的同时，还能平行进行GPS与FM的序列式测试模式。这种功能可降低高达75%的整体测试时间。

　　针对Wi-Fi测试采用序列式测试模式，用户可缩短传送多重数据率EVM/功率量测，以及接收封包错误率所耗费的时间。在第一种情况中，IQ2010系统配合待测器件(DUT)，以不同数据传输率送出信号。再加上组件驱动器以及测试程序的支持能力，IQ2010系统能一次捕获多个突发数据率，并减少其自身与待测器件之间的通讯时间，进而缩短6倍的传送测试与校正时间。

The LitePoint IQ2010 is a single system capable of testing up to six radios and standards. The base model comes ready to test WiFi and Bluetooth?. GPS, FM, NFC, WiMAX can be added anytime via simple software licensing.

Reduce Test Time with Multi-Radio Concurrent Testing
Multi-radio devices are increasingly used in mobile phones and other embedded applications. Traditional test approaches add test time with every connectivity standard added to the device. The IQ2010 enables up to 50% test time reduction with respect to traditional approaches. It does so by covering all key connectivity standards in one box, thus enabling one-insertion testing while testing multiple radios concurrently.

Optimize Capital Expenditures with Technology Software Licensing
The IQ2010 allows you to add as many capabilities as needed, whenever you need them. The IQ2010 can be purchased with WiFi and Bluetooth support only: additional technology standards can be added anytime via software licensing in the field. IQ2010’s licensable software platform allows you to adapt your test facilities to the changing needs of your multi-radio devices, without having to commit to capital equipment expenditures in advance.

Reduce WiFi Test Time with Sequence-Based Testing
The IQ2010 features proprietary, sequence-based test flow capability, which dramatically reduces WiFi test time for supported devices. In transmit multi-data-rate testing, the IQ2010 can sequence or step in concert with the device because the test system can capture signals at different data rates in a single capture. While performing a PER receive test, when packets are transmitted to the device, the IQ2010 uses specialized circuits to detect the acknowledgement signals from the device. These signals provide confirmation of the received data, and PER can be calculated without requiring extensive communication with the device, thus saving test time.

?Parameter Ports Specification
InFrequencyRange RF1/RF2 2.15to2.7GHz,3.3to3.8GHz,4.9to6GHz
FM 76to108MHz
NFC DCto30MHz
InPowerRange RF1/RF2 -148to+30dBm/Hz
FM -40to10dBm
NFC 5to1000mVRMS
OutFrequencyRange RF1/RF2 2.15to2.7GHz,3.3to3.8GHz,4.9to6GHz
GPS 1.57542MHz
FM 76to108MHz
NFC DCto35MHz
OutPowerRange RF1/RF2 -95to+10dBm(CW)
GPS -145to-60dBm
FM -110to-40dBm
NFC Upto1000mVRMS
ControlInterface USB2.0(typeBconnector)