加工定制 | 是 | 用途 | 吸塑机 |
包装类型 | 碟 | 适用对象 | 化妆品类 |
适用行业 | 五金、机械 | 品牌 | 上海骏赛 |
型号 | ACF | 产品别名 | 吸塑机 |
热合面积 | 可定制 | 成品尺寸 | 可定制 |
上海骏赛包装机械有限公司
联系电话: 刘璐 021-51870016 13564342156
上海市青浦区白鹤镇外青松公路2563号
网址:www.junsai.com
实物图
样品模具图
产品简介
全自动吸塑机主要用于各种塑胶产品的成型包装,可将塑料片材吸塑成不同形状泡罩或泡壳。其成型原理:将片材加热到一定温度厚,通过真空泵产生负压将塑料片材吸附到模型表面上,经冷却定型而转变成不同形状的泡罩或泡壳。
一、全自动厚片吸塑机特点:
1 变频马达拉片,速度特快,冲击力小;(The frequency conversion motor pulls the piece, the speed express, the impulse is small)
2 数码调节拉片长度,快捷,准确;(The digital adjustment pulls the piece length, quick, accurate)
3 铝合金链轨,磨擦系数小,拉片平顺,外加不锈钢耐磨边框。(The aluminum alloy caterpillar track, the friction factor is small, pulls the piece to be smooth, sur- stainless steel wear-resisting frame)
4 快速简易宽度调节系统;手动调节宽窄,不锈钢模盘。 (Fast simple width governing system; The manual regulation width, the stainless steel molds)
5 调节中闸,中间调节,无油自润轴承设计; (In adjustment floodgate, middle adjustment, non-oil self lubricating bearing design)
6 组合模盘设计,易换式中闸及下闸设计; (The combination molds the design, easy to trade in the formula floodgate and under the floodgate design)
7 电炉采用全封闭式,横推式设计; (The electric stove uses totally enclosed, pushes the type design horizontally)
8 采用独家可推式模盘架,安全、高效、快捷;(Uses own may push the type to mold the frame, safe, highly effective, quickly)
9 气动部分二次稳定装置; (Air operated part two stabilization units)
需要骏赛设备的其他详情,请来电咨询,谢谢合作!
二、 全自动厚片吸塑机基本参数:
1、电源:380V/50Hz
2、气压:0.6~0.8Mpa
3、真空:-0.07~-0.09Mpa
4、 气耗:(空压机)>0.4M3/Min (据成型体积而定)
5、加热板材材质及厚度:ABS、PS、PP、PE、PETG、PA、PC、PMMA,1~10Mm
6、 厚片吸塑机常用规格有(模具的长X宽X高):
W510-610mm W510-660mm W510-710mm
L760-1220mm L760-1118mm L760-1118mm
7、加热功率:根据成型面积和板材厚度而定(分单、双加热)
8、外型尺寸:根据产品的规格尺寸而定